Thursday, 22 December 2011

Merry Christmas everyone!

That's it! After a manic couple of months the last parcel has been dispatched in time for Christmas and I heave a mahoosive sigh of relief. I am completely shattered and in need of some quality time with my family (and perhaps quality STREET with my family? Nah, we're more of a Celebrations kinda household).

I know everyone is doing it but I just wanted to THANK YOU all for your continued support and love for my papercuts. If it wasn't for you lot I would still be pouring myself a cup of ambition as a 9 to 5er. I feel incredibly lucky to be in the enviable position of working for myself, in hours to fit around my family (the youngest of which turns 1 on the 3rd Jan! Where'd the time go?). Seriously. I have to pinch myself sometimes I am *that* happy.

I hope you all have a FABULOUS Christmas with good cheer a plenty and more than your fair share of mulled wine and mince pies! I'll catch you on the flipside...

Big love as ever
Kyleigh xxx

Saturday, 10 December 2011

Family tree

I realise it's been a while. I haven't been a-resting on my laurels, oh no! If you follow me on twitter (@kyleigh) or Facebook ( then you'll know I've been a little busy bee, beavering away on muchos Christmas orders.

Which is what I should be doing now... isn't it funny how procrastination creeps up on you?

The other day I found myself sweeping the kitchen floor. "No!" thought I, "the baby is at the childminder  so you can WORK. NOT clean!!"

So of course, I threw down the broom and ran to my shed to create more happy paper goodies for lovely people wanting something a little different this year. I am overwhelmed by the popularity of my new family tree papercut.

I had it in mind for a while, but was spurred on by an email from a lovely lady who was after a papercut with names on for her boyfriends mum this Christmas. I told her my idea and she agreed to be my guinea pig. It turned out right nice, even if I do say so myself!

I added it to my notonthehighstreet shop and the orders started rolling on in. I'm finding that it's popular not only with families wanting their mums, dads, kids names but people are buying them for grandparents with names of all the grandkids on there.

I have since done them with just 3 names on, all the way up to the tall tree with 6 names. What I like is that every single tree is so different, so many different sizes - some tall, some round. I love it.

Last order date for Christmas delivery is this Monday (12th Dec) so there's still a bit of time!
Go here to order:

Ok, right. Stop talking to me now. I have work to do. And Chris Rea is telling me its 'top to toe in tailbacks'. I love working along to Christmas cheese.

Speak soooooon!
Kyleigh x

Monday, 7 November 2011

My super swapsie with a skillful sewy superwoman!

Who doesn't love a swapsie? Even the word 'swapsie' is enough to have me running out to the playground at first break to have a play and eat a Wagon Wheel.

So here's how this swapsie went down (I think) on Twitter:
Her: Oh I love your papercuts!
Me: Oooh, well I've had a snoop at your things and your quilts are amazeballs!
Her: Are you thinking what I'm thinking?
Me: Indeed I am!

And with that Nella had a completely incredible heirloom quilt (with matching bunting no less!) and Justine (for 'tis her name) had x2 bespoke handcut papercuts, one for a friends wedding and one to celebrate her first anniversary.

Apologies for the rubbish iPhone photos... it really doesn't do this beautiful quilt justice...

When I turned the quilt over I could have cried happy tears! Look at what was embroidered on the back... I didn't even know she was going to do this:

On unpacking, the quilt and bunting smelled so lovely I had to ask Justine what washing powder she used (answer: whatever was on offer!).

Here's some more of Justines beautiful handiwork:

You can check out more of her amazing work on her blog -
Or follow her musings on Twitter ( ) which is where we found each other originally and planned this awesome swapsie!

I love it when a plan comes together *chomps on a big cigar like Hannibal*

 Night night! xx

Monday, 24 October 2011

Christmas is coming, the goose is getting fat...

...please put a penny in the poor mans hat.

Actually, I'd rather you take a look at this wonderful gift guide chock FULL of lovely handmade goodness from some super amazingly talented artisans, many of the them fellow notonthehighstreet sellers.

They actually make proper lovely stuff, not just mess about with paper and a scalpel or two...

Should you happen upon pages 14 and 15, you'll be rewarded by a mugshot of yours truly.
But don't let that put you off...

So take a look, click the links through to their shops (many of them are fellow Notonthehighstreet sellers) and get super organised for Christmas. And bask in the glow and small amount of smugness that you're all done for another year!

Friday, 21 October 2011

How to papercut 2: Cutting your design

By now you'll have (hopefully) read my post about how I like to create my designs using Adobe Illustrator. If you missed that post you can read it here.

In this post I'll show you how I like to hand cut my papercuts. Like I said in my last post, I am self-taught and there's lots of other ways to cut papercuts, but this is personally how I like to do it.

I'm happy to answer any questions - leave a comment or on my Facebook page. Or tweet me (@kyleigh). So let's get down to business.

First off: The Tools
I arm myself with a Fiskars Swivel Blade Scalpel. It is the donkeys conkers. I've tried X-Acto knives, Xcut knives etc etc... but THIS is my weapon of choice. (You can get them in HobbyCraft, as well as replacement blades). This little baby will be doing all the lovely curved cuts.

I also use a fixed blade Swann-Moreton scalpel with a 10A straight blade. This puppy does all the straight edges. You also need a good self-healing cutting mat. I have an A3 and an A4 Ecobra cutting mat (available from

Sticking plaster optional...
Let's cut!
Ok so you've printed out your design, got your blades, got your mat, got a lovely cup of tea in a stripy mug, let's get going.

Start with the swivel scalpel and carefully cut along the curves on the top line of text. In the example below you can see I've done the curves on the serif on the 'r', the shape of the 'e' minus the straights, the lovely roundness of the top of the 'r', 'o' and 's' and the inside of the 't'.

As I cut I move the whole design and cutting mat around (upside down, 180 degrees, 360 degrees etc) so that my hand and more importantly the blade isn't ever in danger of cutting at an awkward angle which would lead to ripping or an uneven, unwanted cut.

The swivel blade doesn't cut in perfectly controllable straight lines, by all means try, but if you just use the swivel scalpel for curves and the fixed scalpel for straights you'll get a better overall cut.

When you've gone along the top line of text cutting the curves switch to your straight blade scalpel and start cutting along the straight edges. Carefully let the blade join the two curved cuts you've already made.

I don't use a ruler for my straight edges, but by all means use a metal ruler if you feel you need to until you get the confidence to keep straight by eye.

When you've cut all the curves and straight edges along the top line, then use a natural horizontal line of the design and take your blade right over to the edge.

like so...

Do this on both edges and carefully pull the paper away. Be gentle and don't tug - if it doesn't come away easily it might be that there's still a tiny bit still to cut, or a curve and a straight edge close to one another haven't cut right through.

easy does it...

Done it? Phew! Ok let's keep going...
Now you need to cut the grey shapes in between the lines and words. Same method: curves first, use a lovely confident swing of the knife, and be careful to stop the knife in the right point - try not to go into the white of the letter.

When you're cutting the straight edges aim to cut AWAY from the letter. For example in the picture above on the base of the 'h' where it touches the 't' I would start by putting the (straight) blade in closest to the letters and cut OUT towards the grey. That way if you cut too far you're only cutting into the grey and not into the white letters.

Keep cutting the curves and straight lines and slowly, little by little, the design will emerge...

On the 't' above, I start next to the vertical of the 't' and cut pulling the knife towards me. This enables you to push the blade in at exactly the right point and if you were to go too far with the cut, then you're only cutting into the grey and not into the 't'.

Speaking of ''t'... don't forget to make time for a cheeky brew! DON'T spill it though...

You're doing great... keep going...

 Pay attention to the detail - don't forget the teeny weeeny little bits.

When you get to the bottom I sometimes split the line in half - so cut the curves and straights to a natural word break, then cut vertically down to the bottom of the page and carefully remove the paper. Then do the same to the other half and the last bit (YAY!) of the design.

Stop doing the celebration dance just for a sec, we're not quite finished. Look carefully at your design and neaten up - trim any little strands of paper sticking out and smooth out any dodgy curves.

Ok *now* you can do a little celebration dance!
Give your fingers a break, tidy up and go get yourself a beer.

Thank you for reading and good luck on your papercutting exploits - I'd love to see them!
Next time I'm thinking of doing a 'how to' on framing my papercuts. Any takers?

Have a great weekend!

PS. A few words about the commission I used for this: The wonderful words (from Othello, as it says) are made more poignant knowing that the dates underneath are the days the recipient was diagnosed with the big 'C'. Keep smiling at the thief xx

Friday, 14 October 2011

How to papercut 1: designing your papercut

So here it is, my first 'how to' on papercutting. In this post I'll show you how I create my typographical designs so they are ready for cutting. I am self-taught, so this is just about how I, personally, like to create my papercuts.

Create your design
With my career background in graphic design its a no-brainer that I'd use Adobe Illustrator to design my papercuts. You may like to put good old fashioned pencil to paper, or use CorelDraw or some other program. I like Illustrator as vectors rock. they are fully scaleable and you get huge control over all the shapes (plus I've been working in Illustrator it since Macs were beige, designing everything from logos to illustrations and web graphics, it's like a lovely comfy jumper).

In this example I started with an A3 sized document as there are lots of words. General rule of thumb: up to around 9 words use A4, or up to around 20 words, use A3.

Draw a large box over most of the page, but leave a gap around the edge. Give the box a fill of 10% black. This becomes the space to work to, you'll be cutting out the grey (as well as the white edge)

Add your words - I use Clarendon typeface, it is so beautiful and lends itself very well to papercutting with it's generous serifs.

Now kern the space between letters that aren't touching each other.
Just a touch - don't overlap too much as you'll lose the definition of the letter.

Next you need to add little connectors to stop the whole thing falling away when you cut.
Use the ascenders and descenders on the letterforms to naturally hold lines together, but where you need a little helping hand, pop in a little skinny rectangle like so:

Where there is a lowercase 'i' or 'j' then you'll need to add a connector to hold the dot on, but if it is touching a letter above there might not be a need for it. Use your noddle. In the example above there's probably no need for the connector on the 'i' as it is touching the 'b' above it, doh!

I make swirly whirly things to embellish and also to further hold the design together, like fancy connectors. I often use hearts, stars, butterflies, sunshine, clouds, planets... You could use embellishments that enhance the lyric or message, or are part of the meaning of the words. Go crazy!

When you feel all your words are held on to one another either by connectors, embellishments, ascenders, descenders or other words then it's time to print your design. Again, as a graphic designer by trade I use the tools of the trade and take the design into Adobe InDesign (an A4 or A3 document) where I scale it slightly if need be, just to make sure it won't be too big or small for the frame.

I love the positivity in the chosen words (which mean more knowing the dates are the days of cancer diagnosis)

I print A4 ones myself - usually onto beautiful recycled speckled creamy coloured paper. For the A3 ones I create a hi res PDF of the design and take it to my local high street printers to print it out onto A3 for me (haven't got an A3 printer y'see). I get him to print 2 copies, this is just in case I make a mistake, it saves a trip to the printers for a replacement. More often than not I just file the second copy, but there was once an incident with spaghetti bolognese and a half handcut A3 commission...grrr

I'll go through how I like to cut my designs in my next post but until then, arm yourself with (in my opinion) my most favourite of scalpels:

The awesomness that is the Fiskars Swivel Scalpel - view
And the humble yet mighty Swann Moreton scalpel with 10A blades
(Oh and you're going to need a cutting mat too)

Please comment with any questions, I always love to hear from you and I'll do my best to reply promptly : )

Wednesday, 12 October 2011

Kern me!

Now *this* is a good game. You can keep your shot em ups, you can keep your beepy catch-the-golden-rings. Give me a game about kerning and I'm a happy geekoid.

My fondness of this game is increased by the fact that I'm good at it. I hate games that I'm rubbish at.
I laugh, I die. I'm floated back to the start line, bump into things, drive off the edge. My kids laugh at me playing anything... haha! not this suckers!

Watch and learn kids... watch and learn.

Wanna test your kerning skillz? Play it now!

Thank you Meric for alerting me to this.. I've wasted time when I should be cutting paper.
(All work and no play and all that)

Sunday, 28 August 2011

For you and me...

This was a commission I did a while ago now - such is the busy life I lead, no time to blog! Grrrr.. Anyhoo, thought I'd share now one this rainy old August afternoon.

The bride and groom met on a London bus, cute huh?

Tuesday, 23 August 2011

10% off anyone?

 As you know my papercuts and lasercuts are available over at, well howd'ya fancy 10% off the ENTIRE site until 4th September? You do? Well scoot on over!

To get the 10% discount just pop in voucher code 1111 at the checkout.

There's some seriously lovely things there, here's a small selection of my faves:

All Tomorrows Parties open edition print by Lola's Room (£13)

Key print cushion by Warbeck & Cox £40

Playmat by Treefall Design £65

'What did you say?' 8x10 print by The Little Illustrator £12

Lovely huh? Anyway, must dash, these papercuts won't cut themselves!
More pics of commissions to follow... bit up against it at the mo...
Have a lovely (rainy) day!
Related Posts Plugin for WordPress, Blogger...